Description
The REP® Smith Machine Rack Attachment adds smooth, vertical guidance to your lifts—and it has a compact design to minimize interference with your racks functionality. You no longer need a costly, space-consuming, stand-alone Smith machine typically found only in commercial gyms. Now you can integrate this compact Smith machine attachment directly onto your current PR-5000 power cage (80" & 93" upright height options)—providing the best all-in-one gym solution at home.
In fact, REP's Smith Machine Attachment goes above and beyond standard Smith machines, with increased range of motion, adjustable bar path angles, and more. Whether you're just starting your fitness journey or are an experienced lifter focused on muscle isolation, a home gym Smith machine can provide controlled, safe, and targeted lifting—helping you build strength, improve technique, and reduce injury risk.
●Adjustability: Customize your setup to suit your lift—choose from a range of angles from –5 to +5 degrees.
When mounting the Smith machine outside the rack using the Mini Front Foot Extension, the adjustable angle range will be limited to –4° to +4°.
●Enhanced Range of Motion: Perform exercises from the floor (e.g., Pendlay rows) to overhead movements with 19 levels of bar height adjustments for 93" racks, 16 levels for 80" racks, and low-profile safety stops that allow for a wider range of motion.
●Smooth Performance: Premium bearings and non-metal-on-metal bar hook contact ensure smooth operation with minimal friction, scratching, or wear.
*If you are installing it outside the rack, one of the front foot extensions listed in the options section is required.
Product specifications
| Overall Width |
1880mm |
| Depth |
Vertical: 146mm
5 degree tilt: 261mm |
| Barbell diameter |
35mm |
| Barbell initial weight |
15kg |
| Sleeve length |
289.5mm |
| Distance between safety hooks |
1058mm |
| Barbell trajectory |
-5° to +5° |
| Lowest position (center of bar) |
396mm |
| Highest position (center of bar) |
80" rack: 1721mm
93" rack: 2029mm |
| Number of rack positions |
80" rack: 16 levels
93" rack: 19 levels |
| Knurled design |
Medium or Aggressive |
| Knurling |
81cm (IPF) and 91cm (IWF) |
| Center knurling |
Yes |
| Load-bearing capacity |
200kg |
| Surface Treatment |
Metallic black powder coat, hard chrome |
| Compatibility |
REP Fitness PR-5000 Series Rack |
Frequently asked questions
Can it be mounted in a four-post rack?
Yes, you can, provided the Ares 2.0 / Ares 1.0 / Athena cable system is not installed. The length of the crossmember determines whether the safety can be used, compatibility with other attachments, and whether it can be installed inside or outside the rack. We are currently developing a new safety that will allow you to use both Smith machine and free weight exercises within the rack.
Can it be mounted in a six-post rack?
Yes, it can be easily installed on a 6-post rack. However, if the rack depth is less than 30 inches, the safety and spotter arms will not work inside the rack. We are currently developing a new safety that will allow you to use both Smith machine and free weight exercises inside the rack.
Will it fit a 16 inch cross member rack?
Varies by configuration.
• 16-inch 4-post (without cable): Mounting and angle adjustable • 16-inch 4-post (with cable): Not supported
Can it be used with Ares 2.0 / Ares 1.0 / Athena cable systems?
It can be used with 6 posts. It is not compatible with 4 posts.
Can it be used with weight storage?
Yes, they can be used together. However, sufficient clearance between the Smith bar and the plate must be ensured.
